Type 2 22 kW home charger

Type 1 (often called J1772) uses a 5-pin single-phase AC connector. Typical home charging tops out around 32 A ≈ 7.4 kW. It’s the norm in North America and used on many Japanese imports. Type 2 uses a 7-pin connector that supports single- and three-phase AC. Home wallboxes commonly deliver 11 kW (3-phase 16 A) or 22 kW (3-phase 32 A). It’s standard across Europe and adopted in many other regions.     One-screen comparison table Item Type 1 Type 2 Pins 5 7 Phase Single-phase Single- or three-phase Typical home charge rate (kW) Up to ~7.4 kW (32 A) 7.4 kW single-phase; 11/22 kW on 3-phase Locking / anti-unplug Latch on the handle Vehicle/charger side lock-pin common Regions North America, parts of Asia Europe, UK, many global markets Common use cases US/CA homes, workplace L2 EU homes and public AC posts     Regions and vehiclesIn North America, most AC charging hardware and vehicles use Type 1. In Europe and the UK, Type 2 is universal for AC at home and in public. If you own an imported vehicle with the “other” inlet, you can often bridge the gap with an adapter, but long-term convenience and reliability are best when your vehicle inlet, home charger, and local infrastructure match the local standard.     Power and wiring basicsSingle-phase 32 A ≈ 7.4 kWThree-phase 16/32 A ≈ 11/22 kW   What that means: with a mid-size EV battery, 7.4 kW typically restores a solid daily commute overnight. Three-phase 11/22 kW shortens dwell time and suits driveways with multiple users or business car parks—but only if the property has three-phase supply and the vehicle’s onboard charger supports those rates.   Tethered vs socket (plug-in) home chargersTethered units have a permanently attached cable. They’re quick to use, encourage correct cable management, and reduce wear on the vehicle inlet. Socketed units accept any compatible cable: they look cleaner on the wall, give you flexibility if you switch vehicles or regions, and let you choose cable length—but you’ll handle the cable each session. Where parking spaces are shared, tethered keeps workflows simple; in mixed fleets or rental apartments, socketed preserves flexibility.     Adapters and compatibilityType 1 ↔ Type 2 adapters exist and work in many everyday cases. Treat them as a bridge, not a strategy. Check current ratings, temperature derating, and whether your vehicle and charger support the same control protocols.   For regular use at a fixed location, aligning the charger with the local standard is the better long-term move. For travel or short-term accommodation, an adapter can be practical as long as you follow the current limits of the weakest component.     AC vs DCType 1 and Type 2 describe AC plugs. CCS1 and CCS2 describe combined systems that add two DC pins beneath the AC section for fast charging. Your AC choice determines home and workplace charging convenience; your DC fast-charging experience depends on the CCS standard in your region and your car’s DC capability. Don’t assume a Type 2 car can fast-charge everywhere in Europe without checking CCS2 support, and likewise for Type 1/CCS1 in North America.     Quick decision flow Region: US/CA/JP → usually Type 1; EU/UK → Type 2   Supply: Do you have single-phase only, or is three-phase available and approved?   Vehicle: What inlet do you have, and what onboard AC power can it accept (e.g., 7.4, 11, or 22 kW)?   Usage plan: Daily overnight at home, or many short sessions with multiple users? Result: Match the plug to the region and vehicle; size the charger to your panel and use pattern; consider an adapter only for edge cases.     For businesses and small sitesIf you serve mixed vehicles, Type 2 sockets (with separate cables) are common across Europe and simplify cable replacement. In North America, dedicated Type 1 tethered posts keep sessions fast and intuitive for staff and visitors. In shared lots, clear signage, cable holsters, and basic training reduce mis-plugs and downtime.     FAQsQ: I have a Type 1 car in Europe. Can I install a Type 2 wallbox at home?A: Yes, but you’ll need an appropriate Type 2-to-Type 1 cable or adapter. For everyday use, consider aligning vehicle and charger on your next upgrade to reduce friction.   Q: Is upgrading to three-phase 22 kW worth it?A: Only if your property has three-phase supply and your car can accept 22 kW AC. Many drivers find 11 kW already more than enough; 22 kW shines for multi-user sites or short dwell patterns.   Q: Do adapters affect safety or warranty?A: Use certified adapters within their current rating and keep connections fully seated and dry. Follow the vehicle and charger manuals; misuse can void warranties.   Q: Which is better for shared parking: tethered or socketed?A: Tethered is faster for casual users and reduces incorrect cable choices. Socketed is more flexible across vehicle types and easier to maintain when cables wear out.   Meet Workersbee’s Portable EV Chargers: Sae j1772 flex charger2portable EV charger type 2 IEC 62196 3-Phase Type 2 EVSE Portable EV Charger